1.Product Feature
Use high bright high CRI imported OSRAM SMD3030
high transmit,high temperature resistant.No UV PC Lens
Wide output 100-240Vac
Application:Park,Highway,Main Road
Lightweight,easy for delivery and install

Home >> Products >> Outdoor LED Lighting Series >> LED Street Light
LED Street Light(2016 new)




YRST-006
  1.Product Feature
Use high bright high CRI imported OSRAM SMD3030
high transmit,high temperature resistant.No UV PC Lens
Wide output 100-240Vac
Application:Park,Highway,Main Road
Lightweight,easy for delivery and install2.Product Parameter
 Model SMD Type&Qty IP Grade Lamp Size Hole Size N.W YRST-12025-006 SMD3030/112pcs IP65 H560*W270*H99mm D65mm 4.32KG YRST-15025-006 SMD3030/168pcs H660*W270*H99mm D65mm 5.12KG
Model Power Input Volt Efficiency Power Factor Dimmble YRST-12025-006 120W 100-240VAC   50-60Hz >89% >0.9 No YRST-15025-006 150W >90% >0.9 No
Model CCT Lumenious Beam angle CRI YRST-12025-006 2500-6500K >100LM/W 90*135° >70 YRST-15025-006 >100LM/W 90*135° >70

3.Installation Instruction

Please turn off power supply before installation,during the installation process no electricity operation allowed

1.Connect the Led street light interface reserve line with poles line,noted that when live,neutral and ground line without clear identity,please obey as following:

Home >> Products >> Outdoor LED Lighting Series >> LED Street Light
LED Street Light(2016 new)




YRST-006
  1.Product Feature
Use high bright high CRI imported OSRAM SMD3030
high transmit,high temperature resistant.No UV PC Lens
Wide output 100-240Vac
Application:Park,Highway,Main Road
Lightweight,easy for delivery and install2.Product Parameter
 Model SMD Type&Qty IP Grade Lamp Size Hole Size N.W YRST-12025-006 SMD3030/112pcs IP65 H560*W270*H99mm D65mm 4.32KG YRST-15025-006 SMD3030/168pcs H660*W270*H99mm D65mm 5.12KG
Model Power Input Volt Efficiency Power Factor Dimmble YRST-12025-006 120W 100-240VAC   50-60Hz >89% >0.9 No YRST-15025-006 150W >90% >0.9 No
Model CCT Lumenious Beam angle CRI YRST-12025-006 2500-6500K >100LM/W 90*135° >70 YRST-15025-006 >100LM/W 90*135° >70
3.Installation InstructionPlease turn off power supply before installation,during the installation process no electricity operation allowed1.Connect the Led street light interface reserve line with poles line,noted that when live,neutral and ground line without clear identity,please obey as following:
Dark Color Line L Shallow Color Line N Double Color Line G

2.After loosing bolt ;
3.Adjusting it to the proper place according to pole diameter,fix the light （light installation hole ）to the light pole;
4.Locking bolt (B)tightly，help the light fix in the pole tight and stable;
5.Connect the power supply and turn on light.

Attention
1.Please read the product specification to confirm compliance with the conditions for use environment on the specification before installation.
2.Before the product access to power, make sure the switch is off.
3.Light should be installed by a qualified electrician, in line with IEE wiring electrical standards or national standards.
4.The product is waterproof usually for outdoor place.
5.Please do not use under high or low voltage state in a long-term, it will affect the normal use of the function and life;
6.Do not install and use within flammable objects, no matter what the circumstances, the lamp can not be covered by insulation material or similar;
7.Please turn off power supply when Install, replace, cleaning the lamps to ensure personal safety; 
8.When finding lamp not working (self-extinguishing, flashing), check the connection plug contact performance, and power supply voltage , if normal, the fault persists, replaced by a new lamp；
9.When cleaning, use a soft cloth to wipe wring soap stick, wipe with a dry cloth, please do not use banana water until clean light surface volatile substances, do not spray any chemicals on the lamp, the lamp may be discolored or damaged；
10.10.Please do not assemble the light freely,otherwise it will out of  warranty service

PS:More details,please download specification.